Press and release the LEARN button on the overhead opener unit. The learn indicator light will glow steadily for 30 seconds. Within this 30 second time period, press and hold the button on the hand-held remote. Next, release the button when the overhead opener unit's lights blink. If light bulbs are not installed on your opener, then two clicks will be heard.

To erase all codes from motor unit memory:
Press and hold the LEARN button on motor unit until the learn indicator light goes out (approximately 6 seconds). All previous codes are now erased. Reprogram each remote or keyless entry you wish to use. and hold the ENTER button. Next, release the button when the overhead opener unit's lights blink. If light bulbs are not installed on your opener, then two clicks will be heard.